Mail:christy AT ecufocus.com

M:+8613760152943

OP-COM - PC Based Opel Diagnostic

OP-COM is a PC based diagnostic program.
It covers almost all Opel cars, even new cars

 with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.

The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.

??he program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
??ince Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
??IN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
??ault codes will be shown with all available information:
??ull fault code text description
??ull status information (Present, Not present, Intermittent)
??ou can print out, save, or copy the fault codes to any other application.
From the fault codes window, you can go directly to the measuring blocks window.
??he program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
??ou can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
??SCAN  - Dual-wire, High Speed CAN-BUS, 500 kbps
??SCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
??WCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
??ou will get a feedback on the state of the activated output. This will helps you to find the failed components more easily.